Gloved hand holding a moisture meter against a damp wall

Commercial · Pumps & drainage

Leak detection& thermal imaging.

A high water bill or a damp wall usually means a hidden leak. We track it down so only the right spot gets opened.

  • No guesswork
  • Thermal imaging
  • Found, then fixed

Overview

Hidden leak? We'll find it.

A leak you can't see still costs money and can damage a building over time. On commercial sites a hidden leak often shows up first as a water bill that jumps for no reason.

We use water meter and pressure tests, acoustic listening equipment, thermal imaging and drain cameras to narrow it down before anything is opened up. Once it's found, we repair it and check the meter stays still.

Commercial sites

Offices, schools, strata and industrial sites with a water bill that jumps for no clear reason.

Homes

Damp walls, stains on ceilings, a musty room or a meter that turns with every tap off.

What's included

What you get with every job.

  • Water meter and pressure testsConfirms there's a leak and how big it is.
  • Acoustic listening equipmentWe listen for the leak through floors and walls.
  • Thermal imaging camerasHeat images show wet areas and pipe runs.
  • Only the right spot gets openedLess damage, and a smaller repair.
  • Repaired, then the meter checkedFixed, then the meter checked again.

How it works

From your call to the finished job.

  1. We test the meterTo confirm there's a leak and how big it is.
  2. We narrow it downSection by section, inside and out.
  3. We pinpoint itWith listening gear or a thermal camera.
  4. We fix itAnd check the meter stays still afterwards.

Compliance & safety

Done to standard, documented every time.

What we follow

  • Licensed plumbers, drainers and gasfitters
  • Work done to the plumbing code
  • SWMS and site inductions on every job
  • Checked and tested before we leave
  • Photos and a job report for your records
  • ISO 9001 Quality
  • ISO 45001 Health & safety
  • ISO 14001 Environmental

Questions

Common questions.

How can I tell if I have a leak?

Turn off every tap and watch the water meter for 15 minutes. If it moves, water is escaping somewhere.

Will you have to rip out walls?

We find the leak first so only a small, exact spot needs opening.

Can a leak affect my water bill?

Yes. Even a small constant leak adds up over a quarter.

Can you find leaks on large sites?

Yes. Meter and pressure tests narrow it down section by section, then we pinpoint it with listening gear or a thermal camera.

Need this on your site?

Tell us what you need and we’ll come back with a clear quote.

Call 24/7 on 02 4295 3222Book online